Two-Level Bridle Design (A, B)
The first competition kite with a two-level bridle design in the history of kite sports. The low-stretch Edelrid Kevlar-bridle reduces drag to an absolute minimum and activates the VMG’s incredible upwind performance. The innovative kite changes its angle of attack in a highly efficient manner in contrast to the conventional change of the profile camber over the Z level. The net result: the best angle as well as maximum speed on the racetrack.
The two-level bridle design requires a particularly rigid internal construction to perfectly support the reduced bridles. The profile of the VMG is additionally reinforced with fiberglass rods integrated into the internal rib construction. The rods are protected at the ends and can be replaced. The VMG hardly deforms, the flow is clean and it has a high level of stability in the air, which constantly inspires confidence to push the limit.
Smooth Leading Edge Technology
The VMG gets a special material mix: Inelastic Skytex32 on the leading edge, proven X-Light top and bottom sail as the best combination of weight and robustness and to support the inner structure, TX-Light hard finish rib material. The use of these high quality materials enables a very rigid wing and particularly low deformation from the center to the wing tips. The bridle lines therefore change very homogeneously, which has a positive effect on the stretching and shrinking of the construction, and the maintenance time is significantly reduced.
The VMG is controlled by a one pulley on each wing side and has no mixer, the feeling this gives is unique. The holding forces increase continuously with the force development of the kite, which enables defined and precise feedback at the bar, as if you had the entire surface of the kite in your hand. The profile only changes its angle of attack and gives you access to an enormous wind range, the ratio of power to depower is phenomenal.